Rong Fu 8″ Metal Bandsaw RF-812N Rong Fu 8″ metal bandsaw RF-812N is devised for lightweight cutting on smaller workpieces. This bandsaw is designed with the rigidity of a total of 200kg of weight which is useful in any workshop as well as an on-site fabrication yard. Rong Fu Bandsaw RF-812N is particularly useful for cutting irregular or curved shapes of metal and alloys. You can also make straight cuts and up to 45° angular cuts with its versatile single-phase motor. The saw blade guide is made of carbide for durability while the coolant and chips container tray is also equipped for practical precision on wet cutting, better waste management, and safer working condition. Rong Fu 8″ metal bandsaw RF-812N is highly economical and regarded as a reasonable option by many fabricators in the field of tool-making and general engineering especially on working with light to medium routines. You can easily change the blades and set the minimum radius of a curve that can be cut by the selection of blades, the width of the band, and its kerf. Rong Fu 8″ metal bandsaw RF-812N is a reasonable investment for various scales of fabrication. Cutting Capacity  Here are some features of Rong Fu 8″ metal bandsaw RF-812N, including:  The casting structure assures mechanical strength. Fully adjustable hydraulic down feed controls the rate of descent Full blade cover provides more safety. 4 steps belt speeds allow different cutting speeds. Bearing a carbide guide enhances cutting stability and extends the blade life. Cutting angle from 0 degrees to 45 degrees. Stand jointed with water pan for collecting chips and water Coolant system for wet cutting. With standard blade, chip brush, and length stop set Wheel kit for convenient moving to various workstations

Rong Fu 8″ Metal Bandsaw RF-812N

Rong Fu 8″ metal bandsaw RF-812N is devised for lightweight cutting on smaller workpieces. This bandsaw is designed with the rigidity of a total of 200kg of weight which is useful in any workshop as well as an on-site fabrication yard. Rong Fu Bandsaw RF-812N is particularly useful for cutting irregular or curved shapes of metal and alloys. You can also make straight cuts and up to 45° angular cuts with its versatile single-phase motor. The saw blade guide is made of carbide for durability while the coolant and chips container tray is also equipped for practical precision on wet cutting, better waste management, and safer working condition.

Rong Fu 8″ metal bandsaw RF-812N is highly economical and regarded as a reasonable option by many fabricators in the field of tool-making and general engineering especially on working with light to medium routines. You can easily change the blades and set the minimum radius of a curve that can be cut by the selection of blades, the width of the band, and its kerf. Rong Fu 8″ metal bandsaw RF-812N is a reasonable investment for various scales of fabrication.

Cutting Capacity 

Here are some features of Rong Fu 8″ metal bandsaw RF-812N, including: 

The casting structure assures mechanical strength. Fully adjustable hydraulic down feed controls the rate of descent Full blade cover provides more safety. 4 steps belt speeds allow different cutting speeds. Bearing a carbide guide enhances cutting stability and extends the blade life. Cutting angle from 0 degrees to 45 degrees. Stand jointed with water pan for collecting chips and water Coolant system for wet cutting. With standard blade, chip brush, and length stop set Wheel kit for convenient moving to various workstations