Contact Us

• 

If you want to find out more about

MEP Shark 382-1 SXI EVO Semi-Automatic Bandsaw

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

MEP Shark 382-1 SXI EVO Semi-Automatic Bandsaw SHARK 382-1 SXI EVO, electrohydraulic semi-automatic bandsaw machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes.  Here are some features of MEP Shark 382-1 SXI EVO, including: Maximum Flexibility The three working modes (manual, semi-automatic/dynamic, and semi-automatic) allow performing any kind of cut in the most efficient way. The main control with acoustic commands is assembled on an articulated arm thus granting full control in all operational statuses. The LCD shows the status of the sawing machine and all its parameters thus allowing maximum control in real-time. Programming from the control panel also allows adjustment of the saw head stroke limits according to the dimensions of the bars to cut. The mechanical stops at -45°, 0°, +45°, and +60° are equipped with a locking device at all angles in between. The knurled steel jaws of the cutting vice allow an efficient and safe clamping even in the case of tube cutting. The large working surface granting maximum cutting stability and safety is equipped with hardened steel plates which can be replaced in case of wear. User-Friendly The turning cutting table is assembled on a central pin and roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing cutting it through. Angles scale engraved on the turning table allows you to easily perform precise cuts in perfect tolerance at any angle. The quick-releasing clamping system allows you to manually open/close the vice easily. The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise angle cuts. The coolant flood underneath the cutting table avoids the accumulation of chips and downtimes during the chip removal. A user-friendly interface with a display and mechanical buttons ensures reliable, easy, and intuitive programming.

MEP Shark 382-1 SXI EVO Semi-Automatic Bandsaw

SHARK 382-1 SXI EVO, electrohydraulic semi-automatic bandsaw machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes. 

Here are some features of MEP Shark 382-1 SXI EVO, including:

Maximum Flexibility

• The three working modes (manual, semi-automatic/dynamic, and semi-automatic) allow performing any kind of cut in the most efficient way.
• The main control with acoustic commands is assembled on an articulated arm thus granting full control in all operational statuses.
• The LCD shows the status of the sawing machine and all its parameters thus allowing maximum control in real-time.
• Programming from the control panel also allows adjustment of the saw head stroke limits according to the dimensions of the bars to cut.
• The mechanical stops at -45°, 0°, +45°, and +60° are equipped with a locking device at all angles in between.
• The knurled steel jaws of the cutting vice allow an efficient and safe clamping even in the case of tube cutting.
• The large working surface granting maximum cutting stability and safety is equipped with hardened steel plates which can be replaced in case of wear.

User-Friendly

• The turning cutting table is assembled on a central pin and roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing cutting it through.
• Angles scale engraved on the turning table allows you to easily perform precise cuts in perfect tolerance at any angle.
• The quick-releasing clamping system allows you to manually open/close the vice easily.
• The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise angle cuts.
• The coolant flood underneath the cutting table avoids the accumulation of chips and downtimes during the chip removal.
• A user-friendly interface with a display and mechanical buttons ensures reliable, easy, and intuitive programming.

TECHNICAL SPECIFICATION

0°	300 mm	250 mm	380 x 250 mm
+ 45°	260 mm	250 mm	300 x 200 mm
+ 60°	180 mm	170 mm	200 x 170 mm
- 45°	240 mm	210 mm	280 x 160 mm

Max. vice opening	385 mm
Band size	3770 x 27 x 0.9 mm
Blade motor power	1.5 / 1.8 kw - Three-phase
Blade rotation speed	40 / 80 m/min - 2 Speeds
Capacity of coolant tank	60 L
Height of working table	870 mm

 

Related Products

Behringer Horizontal Mitre Bandsaws HBE610-1256G

Behringer Horizontal Automatic Mitre Bandsaws HBE610-1256GA

MEP Shark 281 Manual Bandsaw

Behringer Horizontal Mitre Bandsaws HBE520-926G

Behringer Horizontal Automatic Mitre Bandsaws HBE320-523GA

Behringer Horizontal Mitre Bandsaws HBE420-723G

Behringer Horizontal Automatic Mitre Bandsaws HBP510-923GA

MEP Shark 332-1 CCS Manual Bandsaw