If you want to find out more about
MEP PH 262 Manual Bandsaw
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
MEP PH 262 Manual Bandsaw PH 262, a manual pull-down band sawing machine to cut metals mitering from -45° to +60°, is also available in the HB (Hydraulic Brake) version to perform, in addition to manual cutting, even single cuts without an operator. The HB device allows performing single cuts without operator intervention by using the operating head weight controlled by a hydraulic circuit and valve. The HB device can be provided as a KIT to install in already manufactured machines. HB device is available only in a three-phase version. Here are some features of MEP PH 262 Manual Bandsaw, including: Structure in grey cast iron g25, reducing drastically vibrations, and longer blade life. Wide working surface granting a perfect working condition and safety; turning table integral with saw head to cut at any angles without damaging the working surface. Sliding vice with sideways movement and fast positioning system. Electrical board with entirely identifiable wiring, stand-by, main switch with lock, short circuit protection, motor overload cutout, min. voltage coil, low voltage system 24 V. Control handle IP55. Driving pulley locked with clamp ring to ensure a strong fastening. Blade-guide heads with 6 Carbide pads instead of bearings to ensure better stability. Fixed stops at - 45°, 0°, +45°, and +60° with a locking lever to lock the saw head. Saw head pivot point with preloaded tapered bearings. Electric pump for the band lubrication and cooling. Brush band-cleaning device. Bi-metal band saw blade for solids and profiles. Instructions manual and spare parts list.
MEP PH 262 Manual Bandsaw
PH 262, a manual pull-down band sawing machine to cut metals mitering from -45° to +60°, is also available in the HB (Hydraulic Brake) version to perform, in addition to manual cutting, even single cuts without an operator.
The HB device allows performing single cuts without operator intervention by using the operating head weight controlled by a hydraulic circuit and valve. The HB device can be provided as a KIT to install in already manufactured machines. HB device is available only in a three-phase version.
Here are some features of MEP PH 262 Manual Bandsaw, including:
 |
|
TECHNICAL SPECIFICATION
 |
 |
 |
|
| 0° | 225 mm | 200 mm | 240 x 160 mm |
| + 45° | 160 mm | 140 mm | 155 x 115 mm |
| + 60° | 90 mm | 90 mm | 90 x 90 mm |
| - 45° | 145 mm | 125 mm | 150 x 100 mm |
| Max. vice opening | 245 mm |
| Band size | 2450 x 27 x 0.9 mm |
| Blade motor power | 0.7 / 0.81 kw - Three-phase |
| Blade rotation speed | 46 / 92 m/min - 2 Speeds |
| Capacity of coolant tank | 15 L |
| Height of working table | 950 mm |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
