If you want to find out more about
Shimpo Water-proof Stroboscope DT-311J NEMA 4X
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
Shimpo Stroboscope DT-311J NEMA 4X is devised by Nidec-Shimpo to simplify the measure of revolutions, velocity and frequency of rotating components or moving parts especially in humid and high exposure of water. Shimpo Stroboscope DT-311J NEMA 4X will perform where other stroboscopes will not. The DT-311J is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. Units combine rugged NEMA 4X (IP65) housing with high performance accuracy, special phase shifting, with shock absorbing components and top mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery. Shimpo Stroboscope DT-315A Features: Internal signal “MODE” (flash), allow manual control and display of flash rate (rpm), deg (flash delay angle in degrees) External triggering control, automatically synchronizes to an input signal Phase “SHIFT” switch, single touch – changes flash timing, 0 – 359 degrees “ZERO” setting control, zeroing at any angle is easy-single touch Long life flashtubes, flash rates of 200-1500 fpm, the DT-311J flash tubes are designed for extra long life Angle division “DIV”, permits special flash interval ratio settings: 1/1, 1/2, 1/3, 1/4, and 2/4 flashes per rotation
Shimpo Stroboscope DT-311J NEMA 4X is devised by Nidec-Shimpo to simplify the measure of revolutions, velocity and frequency of rotating components or moving parts especially in humid and high exposure of water.
Shimpo Stroboscope DT-311J NEMA 4X will perform where other stroboscopes will not. The DT-311J is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. Units combine rugged NEMA 4X (IP65) housing with high performance accuracy, special phase shifting, with shock absorbing components and top mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.
Shimpo Stroboscope DT-315A Features:
- Internal signal “MODE” (flash), allow manual control and display of flash rate (rpm), deg (flash delay angle in degrees)
- External triggering control, automatically synchronizes to an input signal
- Phase “SHIFT” switch, single touch – changes flash timing, 0 – 359 degrees
- “ZERO” setting control, zeroing at any angle is easy-single touch
- Long life flashtubes, flash rates of 200-1500 fpm, the DT-311J flash tubes are designed for extra long life
- Angle division “DIV”, permits special flash interval ratio settings: 1/1, 1/2, 1/3, 1/4, and 2/4 flashes per rotation
TECHNICAL SPECIFICATION
Shimpo Stroboscope DT-311J Details:
| Model | DT- 311J |
| Phase Shift | 0° – 359° / 1° increments |
| Flash Rate/Phase Angle Setter | Rotary dial |
| Display | 4 digit 0.39 in (10 mm) high red LED |
| Divide Ratio | 1/1, ½, 1/3, ¼, 2/4 with shift |
| Input Signal | High level: 5-24 V pulse; Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω |
| Input Impedance | 47k |
| Display Mode | Phase shift (degree), Tachometer |
| Accuracy | ±1 digit |
| Internal Signal Range | 200-1500 FPM |
| Flash Range | 200-1500 FPM |
| FlashTube | Xenon lamp Max: 10w at 1,500 rpm. Life: 1,200 hours at 1,500 rpm |
| Flash Duration | 10 to 40 μs automatically adjusts with flash rate |
| Lux Rating | 8” (20 cm) Distance = 4500 lx @ 1500 fpm, 3375 lx @ 6000 fpm with 4.5″ (110 mm) irradiation diameter. 20” (50 cm) Distance = 1300 lx @ 1500 fpm, 930 lx @ 6000 fpm with 10″ (250 mm) irradiation diameter. |
| Power Requirement | 115VAC±5% 50/60Hz |
| Power Consumption | 20VA max |
| Operating Temperature | 32° to 104°F (0 to 40°C) |
| Dimensions | N/A |
| Product Weight | 4.2 lbs (1.9 kg) |
| Package Weight | 6.2 lbs (2.81 kg) |
| Included Accessories | 19.68’ (6m) input/power cable with connector, rubber strobe guard w/ handle |
Shimpo Stroboscope DT-311J Ordering Guide:
| DT-311J | Harsh Environment NEMA 4X (IP65) Stroboscope with Included power 19.68’ (6m) cable, rubber strobe guard with handle |
| DT-311J-230V | Same as 311J but with 230 VAC power |
| NIST-STROBE | NIST traceable certificate with data |
Shimpo Stroboscope DT-311J Optional :
| FLASHTUBE311-J | Replacement flash tube for DT-311J |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
