If you want to find out more about
Shimpo Film Grips Force Gauge Jig GC-2-5
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
Shimpo Film Grips Force Gauge Jig GC-2-5 is devised to firmly holding a test specimen with up to 500 Newton of force test. You can hold an object not only with thin and flatter properties but also stretchy and has a high stickiness as well. This jacob chuck is suitable for tensile test on and peel tests on tapes, plaster bandage, film strips, waterproofing strip etc by turning its thumb keys. This classic mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. You can also use Shimpo Film Grips Force Gauge Jig GC-2-5 for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 features: Precisely measured as a clamping jig on 500 Newton force test Round bar shaped test pieces can be held firmly with zero slip. Compatible gauge attachement with Shimpo FGJN-1～50, FGP-1～50 and FGPX-1～50. Suitable for clamping sheets of thinner material, tapes, plaster bandage, tore test of sachet and many more.
Shimpo Film Grips Force Gauge Jig GC-2-5 is devised to firmly holding a test specimen with up to 500 Newton of force test. You can hold an object not only with thin and flatter properties but also stretchy and has a high stickiness as well. This jacob chuck is suitable for tensile test on and peel tests on tapes, plaster bandage, film strips, waterproofing strip etc by turning its thumb keys.
This classic mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. You can also use Shimpo Film Grips Force Gauge Jig GC-2-5 for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well.
Shimpo Jacob’s Chuck Grips Force Gauge Jig GC-20 features:
- Precisely measured as a clamping jig on 500 Newton force test
- Round bar shaped test pieces can be held firmly with zero slip.
- Compatible gauge attachement with Shimpo FGJN-1～50, FGP-1～50 and FGPX-1～50.
- Suitable for clamping sheets of thinner material, tapes, plaster bandage, tore test of sachet and many more.
TECHNICAL SPECIFICATION
Shimpo Film Grips Force Gauge Jig GC-2-5 Ordering Guide:
| 型式 / Product number | GC-20 |
| 試験方向 / Operating direction | 引張り / Pulling |
| 許容荷重 / Maximal load | 500N |
| 開き幅 / Open width | 2mm |
|
取付可能フォースゲージ Compatible With All Shimpo Force Gauge |
FGJN-1～50 FGP-1～50 FGPX-1～50 |
| 質量 / Weight | 上側：約150ｇ Upper part 下側：約420ｇ Lower part |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
