If you want to find out more about
Shimpo Bending Test Force Gauge Jig FGTT-531
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
Shimpo Bending Test Force Gauge Jig FGTT-531 is devised as a pedestal to test specimen with up to 5000 Newton of force. This heavy duty set of fixtures are suitable for testing the bending strenght of flat designed material such as printed circuit board, solar panel, LCD panel, fiber and photovoltaic cell, metal plates and many more. Equipped with simple roller bars mechanism, this durable fixture is intended for testing flatter material with its 70 mm of opening. You can work this fixture with any digital or analog force gauge. You can also run multiple, layered or sandwiched material (Fibre-reinforced plastic) on a sequence of push to gage the material strength with either motorized-programmable force test or with manual pulling stand combination. You can simply secure its lower fixture part with M8 threaded fastener for a firm application. You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Bending Test Force Gauge Jig FGTT-531 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or highly precise force with Shimpo motorised digital stand as well. Shimpo Bending Test Force Gauge Jig FGTT-531 features: The slim shape allows the fixture to securely hold even small parts of the test piece. Compatible gauge attachement with Shimpo FG-1～100. Suitable for bending strenght of flat designed material such as printed circuit board, solar panel, LCD panel, fiber and photovoltaic cell, metal plates and many more.
Shimpo Bending Test Force Gauge Jig FGTT-531 is devised as a pedestal to test specimen with up to 5000 Newton of force. This heavy duty set of fixtures are suitable for testing the bending strenght of flat designed material such as printed circuit board, solar panel, LCD panel, fiber and photovoltaic cell, metal plates and many more. Equipped with simple roller bars mechanism, this durable fixture is intended for testing flatter material with its 70 mm of opening.
You can work this fixture with any digital or analog force gauge. You can also run multiple, layered or sandwiched material (Fibre-reinforced plastic) on a sequence of push to gage the material strength with either motorized-programmable force test or with manual pulling stand combination. You can simply secure its lower fixture part with M8 threaded fastener for a firm application.
You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Bending Test Force Gauge Jig FGTT-531 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or highly precise force with Shimpo motorised digital stand as well.
Shimpo Bending Test Force Gauge Jig FGTT-531 features:
- The slim shape allows the fixture to securely hold even small parts of the test piece.
- Compatible gauge attachement with Shimpo FG-1～100.
- Suitable for bending strenght of flat designed material such as printed circuit board, solar panel, LCD panel, fiber and photovoltaic cell, metal plates and many more.
TECHNICAL SPECIFICATION
Shimpo Bending Test Force Gauge Jig FGTT-531 Dimension:
Shimpo Bending Test Force Gauge Jig FGTT-531 Ordering Guide:
| 型式 / Product number |
FGTT-531 |
| 試験方向 / Operating direction | 押し / Push |
| 許容荷重 / Maximal load | 5000N |
| 開き幅 / Open width | 70 mm |
|
取付可能フォースゲージ Compatible With All Shimpo Force Gauge |
FGJN-1～50 FGP-1～50 FGPX-1～50 |
| 質量 / Weight | 上側：約 Upper clamp 220ｇ 下側：約 Lower clamp 6.2ｋｇ |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
