The flow tester CETATEST 915 is used to measure the flow using compressed air. The device contains a measurement system consisting of a laminar flow element (LFE) and a differential pressure sensor. The differential means that the Piezo-resistive gage pressure sensor also measure the actual value by comparing the current measurement of test with allowed parameter setting automatically. CETATEST 915's differential pressure sensor and relative pressure sensor are  capable of testing pressure ranges from -1,000 mbar, 150 mbar, 1,000 mbar, 6 bar (other pressures on request). The cost-effective Flow Tester CETATEST 915 also provide data output via USB which then can be conveniently saved into a USB flash drive for traceable data record or further analysis of acceptable parameter via CETA PC software and spreadsheet as well. Furthermore, its parameter can also be exported or imported using an USB storage device. CETATEST 915 operate in the direct test method of which the air, provided by the internal pressure regulator, flows through the measuring section before it enters the test part. In the indirect test method the measuring section is located behind the test part. Due to the special design of the measuring section a laminar flow is generated. The resulting pressure difference is directly proportional to the volume flow. Your investment on Flow Tester CETATEST 915 will lead your way to unlocks higher level of precision in detecting irregularity of flow on both very small to medium ratios of test part volumes on mass production system. With the CETA flow testers the volume flow through the test part can be measured conveniently. By the use of appropriate laminar flow elements a wide range of flows can also be covered.   Flow Tester CETATEST 915 Features: Laminar flow element with differential pressure transducer Abilities for direct or indirect test method Test pressure sensor is using Piezo-resistive gage pressure sensor Measurement range is 15 ml/h to 62 l/min (depending on the laminar flow element) Unit of measurement are ml/min, ml/h, l/min, l/h Pressure controller is using both mechanical and electronical method Ideal test pressure range are -1 bar • 200 mbar • 1 bar • 6 bar • 10 bar Compact form factor of 345 mm x 145 mm x 435 mm (W x H x D) Suitable application Tests of valves, exhaust gas systems, pipes, membranes, automation filling, within the automated cycle of food-beverages packaging industry, pharmaceuticals, medical equipment and many more.   To serve your interest on Flow Tester CETATEST 915, kindly contact our sales department.

The flow tester CETATEST 915 is used to measure the flow using compressed air. The device contains a measurement system consisting of a laminar flow element (LFE) and a differential pressure sensor. The differential means that the Piezo-resistive gage pressure sensor also measure the actual value by comparing the current measurement of test with allowed parameter setting automatically. CETATEST 915's differential pressure sensor and relative pressure sensor are  capable of testing pressure ranges from -1,000 mbar, 150 mbar, 1,000 mbar, 6 bar (other pressures on request).

The cost-effective Flow Tester CETATEST 915 also provide data output via USB which then can be conveniently saved into a USB flash drive for traceable data record or further analysis of acceptable parameter via CETA PC software and spreadsheet as well. Furthermore, its parameter can also be exported or imported using an USB storage device. CETATEST 915 operate in the direct test method of which the air, provided by the internal pressure regulator, flows through the measuring section before it enters the test part. In the indirect test method the measuring section is located behind the test part. Due to the special design of the measuring section a laminar flow is generated. The resulting pressure difference is directly proportional to the volume flow.

Your investment on Flow Tester CETATEST 915 will lead your way to unlocks higher level of precision in detecting irregularity of flow on both very small to medium ratios of test part volumes on mass production system. With the CETA flow testers the volume flow through the test part can be measured conveniently. By the use of appropriate laminar flow elements a wide range of flows can also be covered.

 

Flow Tester CETATEST 915 Features:

• Laminar flow element with differential pressure transducer
• Abilities for direct or indirect test method
• Test pressure sensor is using Piezo-resistive gage pressure sensor
• Measurement range is 15 ml/h to 62 l/min (depending on the laminar flow element)
• Unit of measurement are ml/min, ml/h, l/min, l/h
• Pressure controller is using both mechanical and electronical method
• Ideal test pressure range are -1 bar • 200 mbar • 1 bar • 6 bar • 10 bar
• Compact form factor of 345 mm x 145 mm x 435 mm (W x H x D)
• Suitable application Tests of valves, exhaust gas systems, pipes, membranes, automation filling, within the automated cycle of food-beverages packaging industry, pharmaceuticals, medical equipment and many more.

 

To serve your interest on Flow Tester CETATEST 915,

kindly contact our sales department.