If you want to find out more about

DoALL Diamond Saw Blade Series

Talk to us at :

(65) 6749 9697

sales@lfc.com.sg

DoALL Diamond Saw Blade is compatible for various bandsaws and reciprocating saws. Depends on your machinery set up, DoALL diamonds Saw Blade performs consistently balanced between power to cut ratio for a cost effective job on cutting solid. The DoALL Diamond Saw Blade is manufactured from a high speed steel material coated with diamonds. DoALL diamonds Saw use nickel electroplated technology to transfer the diamond shards onto its steel blade base. This method produce a very thin and consistently sharp surface which actually consists of zillion cutting edges with tens of micrometres thick. By this innovative approach, DoALL Diamond Saw Blade enable you to work on highly abrasive material which on comparable saw needs longer hour with higher cost.

DoALL Diamond Saw Blade is suitable for cutting silicum, glass, fiberglass, quartz, abrasive composites, graphite, carbide, marble, carbon-granite, concrete, asphalt, masonry, and gem-cutting and ceramic. With free-flow water coolant, DoALL Diamond Saw Blade will give you the reliability and versatility in working on granite slab, carbon composites sheet, asbestos automotive brakes, electrical ceramic bobbins, marine fiberglass industry, aerospace equipment, resin tubes and many other application which may varies.

Features

Diamond grit edge
Continuous for materials up to 25 mm, segmenteed for large materials

Benefits

Grinds hardest, most brittle, abrasive materials known

Applications

Silicon, glass, quartz, abrasive composites, hard graphites, carbide, marble, limestone, brake linings etc
Not for steel!

TECHNICAL SPECIFICATION

DoALL Penetrator Saw Blade Ordering Guide:


Metric		Type	Selectable Diamond Grit size
Width	Gauge		25/30	40/50	60/80	100/120	200
13	0,5	Continuous		406-942	406-918	OR	OR
19	0,5	Continuous		406-959	406-926	406-750	406-769
		Segmented		406-741	OR	OR	OR
	1,0	Continuous	406-422	OR	OR	OR	OR
25	0,5	Continuous		406-967	406-934	406-971	OR
		Segmented		406-827	406-843	406-846	OR
	1,0	Continuous	406-421	406-552	406-462	OR	OR
		Segmented	406-422	OR	406-433	OR	OR
32	0,5	Continuous		406-807	406-804	406-802	OR
		Segmented		406-813
	1,0	Continuous	406-428	OR	406-476	OR	OR
		Segmented	406-447	OR	406-483	OR	OR
38	0,5	Continuous		406-817	OR	OR	OR
	1,0	Segmented	406-480	OR	OR	OR	OR
		Continuous	406-456	OR	OR	OR	OR
50	1,0	Continuous	406-496	OR	406-830	OR	OR
		Segmented	406-837	OR	406-833	OR	OR
Kerf	Factor	Milimeters	1,6	0,9	0,6	0,4	0,2

			OR	Colored areas available on request (minimum order required)
			Note	To determine approximate kerf: add kerf factor to gauge of the band

NOTES:

Be advised that freeflow of water as a coolant will prevent the DoALL diamond blade from overheating, greatly reduce the amount of harmful dust created by cutting, remove the slurry from the cut, and extend the life of the blade at the same time.

You can also download DoALL Saw Blade catalogs here