DeFelsko devised PosiTest AT Verifier for checking the accuracy and operation of PosiTest Adhesion Testers as it is an important component in fulfilling both ISO and in-house quality control requirements. Equipped with handheld smart sensor indicator and high precision load cell, the whole set is applicable for on-site verification as well as to be used in the laboratory to compare the measurement output of any DeFelsko's series of PosiTest Pull-Off Adhesion Testers. Furthermore, it also fitted with a permanent steel 20 mm loading fixture (dolly) to ease the applicable stage of testing. Your investment on PosiTest AT Verifier and included documents will allow you to quickly verify the accuracy of PosiTest Adhesion Testers and check whether the probe is actually good enough for any given routine. DeFelsko  PosiTest AT Verifier also enables you to certify your paint or coating job fits with the most demanding requirement. DeFelsko  PosiTest AT Verifier is the most renowned industrial adhesion test verifier for painting contractors, coating specialist, certification company and supporting apparatus for valuing the remaining life assessment analysis of a used product. DeFelsko  PosiTest AT Verifier kit is consist of handheld smart sensor indicator and high precision load cell. DeFelsko  PosiTest AT Verifier is operated by connecting the adhesion tester’s pull-off actuator to the PosiTest AT Verifier’s loading fixture. Then, applying pressure using the adhesion tester’s normal operating procedure. When the readings are known, the user can just simply comparing the values from any adhesion tester with DeFelsko PosiTest AT Verifier.   DeFelsko  PosiTest AT Verifier features: High precision load cell and handheld smart sensor indicator Peak hold and real time reading display Bonded foil strain gages are hermetically sealed for protection against industrial environments Ready to use with all PosiTest Pull-Off Adhesion Testers Ideal for field or laboratory use Fitted with a permanent steel 20 mm loading fixture (dolly). A conversion factor is used to verify other sizes. Portable — requires no external power source Comes with a Sample Certificate of Accuracy and Measurement Uncertainty Worksheet The device are packed with load cell, smart sensor indicator, built-in rechargeable Lithium Ion batteries with universal AC adaptor, instructions, Sample Certificate of Accuracy, Measurement Uncertainty Worksheet, hard shell carrying case, two (2) Certificates of Calibration traceable to NISTCertificates of Calibration showing traceability to NIST are included for both the load cell and smart sensor indicator.    

DeFelsko devised PosiTest AT Verifier for checking the accuracy and operation of PosiTest Adhesion Testers as it is an important component in fulfilling both ISO and in-house quality control requirements. Equipped with handheld smart sensor indicator and high precision load cell, the whole set is applicable for on-site verification as well as to be used in the laboratory to compare the measurement output of any DeFelsko's series of PosiTest Pull-Off Adhesion Testers. Furthermore, it also fitted with a permanent steel 20 mm loading fixture (dolly) to ease the applicable stage of testing.

Your investment on PosiTest AT Verifier and included documents will allow you to quickly verify the accuracy of PosiTest Adhesion Testers and check whether the probe is actually good enough for any given routine. DeFelsko  PosiTest AT Verifier also enables you to certify your paint or coating job fits with the most demanding requirement. DeFelsko  PosiTest AT Verifier is the most renowned industrial adhesion test verifier for painting contractors, coating specialist, certification company and supporting apparatus for valuing the remaining life assessment analysis of a used product.

DeFelsko  PosiTest AT Verifier kit is consist of handheld smart sensor indicator and high precision load cell. DeFelsko  PosiTest AT Verifier is operated by connecting the adhesion tester’s pull-off actuator to the PosiTest AT Verifier’s loading fixture. Then, applying pressure using the adhesion tester’s normal operating procedure. When the readings are known, the user can just simply comparing the values from any adhesion tester with DeFelsko PosiTest AT Verifier.

 

DeFelsko  PosiTest AT Verifier features:

• High precision load cell and handheld smart sensor indicator
• Peak hold and real time reading display
• Bonded foil strain gages are hermetically sealed for protection against industrial environments
• Ready to use with all PosiTest Pull-Off Adhesion Testers
• Ideal for field or laboratory use
• Fitted with a permanent steel 20 mm loading fixture (dolly).
• A conversion factor is used to verify other sizes.
• Portable — requires no external power source
• Comes with a Sample Certificate of Accuracy and Measurement Uncertainty Worksheet
• The device are packed with load cell, smart sensor indicator, built-in rechargeable Lithium Ion batteries with universal AC adaptor, instructions, Sample Certificate of Accuracy, Measurement Uncertainty Worksheet, hard shell carrying case, two (2) Certificates of Calibration traceable to NISTCertificates of Calibration showing traceability to NIST are included for both the load cell and smart sensor indicator.