If you want to find out more about
Behringer Horizontal Mitre Bandsaws HBE520-926G
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
Behringer Horizontal Mitre Bandsaws HBE520-926G Universal and Flexible With 4 sizes, the miter band saws of the HBE series cover the entire application spectrum from small metal construction workshops to fully automated steel construction operations. All models are robustly built, and the belt guiding parts are made of vibration-damping grey cast iron and can be precisely positioned to different miter angles via an axial bearing. The BEHRINGER cutting pressure control, which dynamically adapts the feed rate to changing profile cross-sections, is of course on board as standard. For Steel Construction and Sectional Steel Trade The high-performance miter bandsaw machine HBE520-926G is designed for the automatic sawing of structural steel, profiles, and pipes. Features such as electronic miter angle adjustment, saw feed with servo motor, BEHRINGER cutting pressure control, automatic guide arm adjustment, and a robust double clamping vice are provided as standard. Its stable saw frame, inclined band wheels, and the use of vibration-damping cast components extend the service life of the saw bands tremendously. When processing large profiles, however, material handling is in addition to the cutting performance also a key factor in determining the system throughput. The HBE520-926G is therefore consequently designed for low-operator use in automated sawing lines. Extensive infeed and discharge systems, pre- and post-buffer lines, and an intelligent control system with nesting functionality cover all requirements. Here are some features of Behringer Horizontal Mitre Bandsaws HBE520-926G, including: Enclosed Material Table The closed table support makes working with the miter band saw easier. Even short sections can be transported in and out of the machine without any problems. Servo Feed System The saw feed is carried out using a ball screw and servo motor. This results in shorter non-productive times and more precise saw feeds. The Behringer servo feed system also comes with cutting pressure control. It increases the cutting performance when sawing tubes and profiles, as it automatically adapts the saw feed of the machine to the changing material cross-sections. Due to the arrangement directly at the back of the blade, the system regulates quickly and precisely. Powerful PC Control Cast Iron Bandsaw Guide Manufactured by Behringer, the band guide provides a vibration-damping effect. It directly reduces vibration at the edge where the material is cut. As a result, the bandsaw blade tool life is increased. Fast NC Mitre Angle Adjustment Electrically Driven Chip Brush With the Behringer quick-change device for tool-free brush changes, the teeth of the bandsaw blades are protected by the special engagement angle. Magnetic Chip Conveyor (Option) Other Features: Precision Portal-Design Guide System The combination of a stable, low-vibration saw frame and the linear guide system in the portal design ensure the best cutting results and maximum service life. 6° Inclination of the Saw Blade Provides higher cutting performance when sawing hollow profiles and beams and reduces burr formation. Automatic Guide Arm Optimum sawing result without any adjustments - even with frequently changing material sizes. Customer-Oriented Sawing Concepts Behringer offers complete system solutions with individual material handling where everything fits together perfectly. We are a competent partner and provide comprehensive advice. Powerful Saw Drive A wide range of blade speed adjustments offers flexibility for various starting materials from stainless steel to aluminum. Vertical Clamping Device on both sides of the Saw Band Thanks to the standard combination of horizontal and vertical clamping devices, all profile shapes are securely clamped. This gives you the maximum flexibility in processing. Double Clamping Vice Offers process reliability - especially when sawing bundles or making single cuts. The clamping jaws are arranged on the infeed and outfeed side and clamp both the starting material and the finished cut. Micro Spray System When sawing profiles, pipes, and solid material, the standard minimum quantity lubrication system delivers the best results. The saw blade is constantly moistened with cutting oil via two nozzles. This guarantees a long service life for the saw blade and a clean working environment. LFC is the exclusive distributor of Behringer sawing machines in Singapore and Malaysia. The Behringer Horizontal Mitre Bandsaws HBE520-926G can be configured perfectly to your requirements with numerous options. This is how you get the most out of your production. Our team will be pleased to advise you. Contact us for a discussion! LFC PTE LTD 8 Ubi Rd 2, #03-01, Zervex Singapore 408538 EMAIL sales@lfc.com.sg PHONE (65) 6749 9697
Behringer Horizontal Mitre Bandsaws HBE520-926G
Universal and Flexible
With 4 sizes, the miter band saws of the HBE series cover the entire application spectrum from small metal construction workshops to fully automated steel construction operations. All models are robustly built, and the belt guiding parts are made of vibration-damping grey cast iron and can be precisely positioned to different miter angles via an axial bearing. The BEHRINGER cutting pressure control, which dynamically adapts the feed rate to changing profile cross-sections, is of course on board as standard.
For Steel Construction and Sectional Steel Trade
The high-performance miter bandsaw machine HBE520-926G is designed for the automatic sawing of structural steel, profiles, and pipes. Features such as electronic miter angle adjustment, saw feed with servo motor, BEHRINGER cutting pressure control, automatic guide arm adjustment, and a robust double clamping vice are provided as standard. Its stable saw frame, inclined band wheels, and the use of vibration-damping cast components extend the service life of the saw bands tremendously.
When processing large profiles, however, material handling is in addition to the cutting performance also a key factor in determining the system throughput. The HBE520-926G is therefore consequently designed for low-operator use in automated sawing lines. Extensive infeed and discharge systems, pre- and post-buffer lines, and an intelligent control system with nesting functionality cover all requirements.
Here are some features of Behringer Horizontal Mitre Bandsaws HBE520-926G, including:
|
Enclosed Material Table The closed table support makes working with the miter band saw easier. Even short sections can be transported in and out of the machine without any problems. |
|
 |
Servo Feed System The saw feed is carried out using a ball screw and servo motor. This results in shorter non-productive times and more precise saw feeds. The Behringer servo feed system also comes with cutting pressure control. It increases the cutting performance when sawing tubes and profiles, as it automatically adapts the saw feed of the machine to the changing material cross-sections. Due to the arrangement directly at the back of the blade, the system regulates quickly and precisely. |
|
Powerful PC Control |
|
 |
Cast Iron Bandsaw Guide Manufactured by Behringer, the band guide provides a vibration-damping effect. It directly reduces vibration at the edge where the material is cut. As a result, the bandsaw blade tool life is increased. |
|
Fast NC Mitre Angle Adjustment |
|
 |
Electrically Driven Chip Brush With the Behringer quick-change device for tool-free brush changes, the teeth of the bandsaw blades are protected by the special engagement angle. |
|
Magnetic Chip Conveyor (Option) |
|
Other Features:
Precision Portal-Design Guide System
The combination of a stable, low-vibration saw frame and the linear guide system in the portal design ensure the best cutting results and maximum service life.
6° Inclination of the Saw Blade
Provides higher cutting performance when sawing hollow profiles and beams and reduces burr formation.
Automatic Guide Arm
Optimum sawing result without any adjustments - even with frequently changing material sizes.
Customer-Oriented Sawing Concepts
Behringer offers complete system solutions with individual material handling where everything fits together perfectly. We are a competent partner and provide comprehensive advice.
Powerful Saw Drive
A wide range of blade speed adjustments offers flexibility for various starting materials from stainless steel to aluminum.
Vertical Clamping Device on both sides of the Saw Band
Thanks to the standard combination of horizontal and vertical clamping devices, all profile shapes are securely clamped. This gives you the maximum flexibility in processing.
Double Clamping Vice
Offers process reliability - especially when sawing bundles or making single cuts. The clamping jaws are arranged on the infeed and outfeed side and clamp both the starting material and the finished cut.
Micro Spray System
When sawing profiles, pipes, and solid material, the standard minimum quantity lubrication system delivers the best results. The saw blade is constantly moistened with cutting oil via two nozzles. This guarantees a long service life for the saw blade and a clean working environment.
LFC is the exclusive distributor of Behringer sawing machines in Singapore and Malaysia. The Behringer Horizontal Mitre Bandsaws HBE520-926G can be configured perfectly to your requirements with numerous options. This is how you get the most out of your production. Our team will be pleased to advise you. Contact us for a discussion!
TECHNICAL SPECIFICATION
| Cutting Range | |
| Cutting range 90° round | 520 mm |
| Cutting range 90° flat | 920 x 520 mm |
| 75° Mitre left round / flat | 520 mm / 920 x 520 mm |
| 60° Mitre left round / flat | 520 mm / 810 x 520 mm |
| 45° Mitre left round / flat | 520 mm / 640 x 520 mm |
| 30° Mitre left round / flat | 430 mm / 430 x 520 mm |
| 75° Mitre right round / flat | 520 mm / 920 x 500 mm |
| 75° Mitre right round / flat | 520 mm / 810 x 500 mm |
| 75° Mitre right round / flat | 520 mm / 640 x 500 mm |
| Smallest Dimension to be sawn round | 30 mm |
| Smallest Dimension to be sawn flat | 30 x 30 mm |
| Performance Characteristics | |
| Drive Power | 5.5 kW |
| Blade Speed | 17 - 120 m/min |
| Saw Blade Dimension | 8,500 x 54 x 1.6 mm |
| Rest piece length | 45 mm |
| Total power |
11 kW |
| Saw Feed | Servo feed via ball screw |
| Material Clamping | hydraulic |
| Saw blade cleaning | electrically driven chip brush |
| Dimension & Weight | |
| Length | 1,900 mm (3,950 mm at mitre angle 30°) |
| Width | 4,150 mm |
| Height | 2,960 mm |
| Weight | 4,100 kg |
| Material support height | 800 mm |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
