If you want to find out more about
Shimpo Film Grips Force Gauge Jig 6FC-20 （4FC-20）
Talk to us at :
(65) 6749 9697
sales@lfc.com.sg
Shimpo Film Grips Force Gauge Jig 6FC-20 （4FC-20） is devised for firmly holding a test specimen with up to 500 Newton, which are suitable for grip thin objects such as cloth, tape, film, paper within a the touch of a lever. This self-tightening mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination. You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Wire Clamp Force Gauge Jig FGTT-25 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well. Shimpo Wire Clamp Force Gauge Jig FGTT-25 features: Support high-speed force measurement with sampling rate of 1000 times per second. Compatible gauge attachement with Shimpo FGJN-1～50, FGP-1～50 and FGPX-1～50. Configured to grip thin objects such as cloth, plastic bag, tape, film, paper, etc. Suitable for measurement of the force to peel film sheets, from cup-shaped containers and oddly shaped thinner lid. Strength tests for adhesives and tapes.
Shimpo Film Grips Force Gauge Jig 6FC-20 （4FC-20） is devised for firmly holding a test specimen with up to 500 Newton, which are suitable for grip thin objects such as cloth, tape, film, paper within a the touch of a lever. This self-tightening mechanism allows any digital or analog force gauge to run a precision testing of pull combination with either motorized-programmable force test or with manual pulling stand combination.
You can also clamp the lower end part of the specimen with regular locking vise while using this compact clamping attached to the force gauge connecting pin. Shimpo Wire Clamp Force Gauge Jig FGTT-25 is highly recommended for any Shimpo force gauge or any brands on your current workbench. Depend on your budget, you can also order this heavy duty clamp with either manual hand-crank lever stand or Shimpo motorised digital stand as well.
Shimpo Wire Clamp Force Gauge Jig FGTT-25 features:
- Support high-speed force measurement with sampling rate of 1000 times per second.
- Compatible gauge attachement with Shimpo FGJN-1～50, FGP-1～50 and FGPX-1～50.
- Configured to grip thin objects such as cloth, plastic bag, tape, film, paper, etc.
- Suitable for measurement of the force to peel film sheets, from cup-shaped containers and oddly shaped thinner lid.
- Strength tests for adhesives and tapes.
TECHNICAL SPECIFICATION
Shimpo Film Grips Force Gauge Jig 6FC-20 （4FC-20） Ordering Guide:
| 型式 / Models | 4FC-20 | 6FC-20 |
| 試験方向 / Operating direction | 引張り / Pulling | 引張り / Pulling |
| 許容荷重 / Max load | 500N | 500N |
| 幅 / width | 20mm | 20mm |
| 開き幅 / Open Clamp Width | 0～2mm | 0～2mm |
| 取付可能フォースゲージ / Compatible Force Gauges | FG□-0.2、0.5 | FG□-1～100 |
| 質量 / Weights | 約75g | 約75g |
Request a Quote
Request A Quote
Please complete the below form to receive further information.
